FlashMax P3—the world’s most powerful curing light
The FlashMax P3 Curing Light cures most composites in one to three seconds per layer with 4,000mW/cm2 performance. Cordless unit weighs only 4.2 oz.
- Duplicate control buttons on two sides.
- 4mm or 8mm disposable tips swivel 15°.
- Audible overheat warning.
- Auto-sleep mode.
Simple, two-button system controls three LED color-coded modes:
- Green—Manual operation: press large button for three seconds of light or small button for one second of light.
- Orange—For large restoration buildup: press large button for three seconds of light followed by a 0.5-second pause, then another three seconds of light. Press small button for one second of light followed by a 0.5-second pause, then another one second of light.
- Red—For cementing ortho brackets or veneers: press large button for 3-second intervals of light with a 0.5-second pause between intervals. Press small button for continuous 1-second intervals of light with a 0.5-second pause between intervals.
Specifications:
- Wavelength range: 450-470nm with peak at 460nm
- Light intensity: 4,000mW/cm2
- Battery life: Approximately 500 seconds (166 3-second cures) on a 2-hour charge
- Battery type: LiFePO4
Includes:
- (1) Charging station with AC power supply
- (1) 4mm single-use curing tip
- (1) 8mm single-use curing tip
- (2) Disposable snap-over probe covers
- (10) Disposable barrier sleeves
- (1) Clip-on bonding shield
Two year warranty.
See FlashMax Single-Use Curing Tips for more tips.
See FlashMax Disposable Probe Covers and FlashMax Disposable Barrier Sleeves for more protection.
